Diferencia entre revisiones de «The first steps of your advanced backup»
Línea 1: | Línea 1: | ||
− | {{ | + | {{In English |The_first_steps_of_your_advanced_backup}} |
− | + | In the next guide we describe in an easy way the first steps to configure your advanced backup. It is mandatory that you have the credential data that we have sent you by e-mail, you will need them to manage the service. | |
− | If you | + | If you don´t have this information you can contact the Support Team. |
− | |||
− | |||
− | |||
− | + | ==First Steps: Control Panel== | |
− | + | ||
− | + | Remember that the servers must communicate with Advanced Backup through a '''VLAN''', so, '''the servers and the Advanced backup must have a private IP. | |
+ | |||
+ | For this we attach VLAN the guide: | ||
+ | |||
+ | [[How_can_I_order_a_VLAN]] | ||
+ | |||
+ | '''Step 1: To access to the Advanced Backup control panel you need to login at Gigas control panel and after that you need to go from where you search for the advanced backup service). | ||
− | [[ | + | ''' |
+ | [[Archivo:1.png|1261px]] | ||
− | + | '''Step 2: If you find the status of advanced backup off you need to turn it on and after that you need to left click on the name of the advanced backup. | |
− | + | ''' | |
− | + | [[Archivo:2.png]] | |
− | + | '''Step 3: We proceed to configure the advanced backup, picking de datacenter and the VLAN for the internal comunicationes between the virtual servers, the IP rank and the password. After that we save. | |
+ | ''' | ||
− | + | [[Archivo:3.png]] | |
− | + | '''Step 4: After the step 3 the server will restarts, it will appears with the new configuration like in the next picture. When you click on the name you need to assign the space for the advanced backup that it will use. (Remmeber that you can find the password of the interface at "Show")''' | |
− | + | [[Archivo:4.png]] | |
− | + | ||
− | + | '''Step 5: You assign the space at you desire and click on "Save", (Remmeber that this space its free by Gigas and shares the space with standard backup). Our Support and Sales team can bring to you all the information and solve your questions if you have anyone. After we select the space in GB format we click on "Save" again. ''' | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | |||
− | + | [[Archivo:5.png]] | |
− | |||
− | + | '''Paso 6: Al terminar de cargar, accedemos al Gestor para entrar al panel del backup avanzado. La dirección tendrá este formato: http://ip_proporcionado_mail:6443, nada más acceder debes loguearte con el usuario "admin" y la contraseña que colocaste al configurar el backup avanzado (Paso 3).''' | |
− | |||
− | + | [[Archivo:6.png]] | |
− | |||
− | + | Si necesitas información adicional sobre la configuración de tu servicio de backup, podrás encontrar manuales completos en el siguiente enlace:<br> | |
+ | http://wiki.r1soft.com/display/ServerBackup/Documentation | ||
− | |||
− | == | + | ==Primeras configuraciones: Backup Avanzado== |
− | + | Paso 1: Al acceder al panel de control, aceptamos los términos y condiciones de la licencia. | |
− | + | [[Archivo:7.png]] | |
− | |||
− | + | Paso 2: Al acceder a la consola del Backup, nos dirigimos a la opción de License Information para activar la licencia del backup avanzado. | |
− | |||
− | |||
− | |||
− | + | [[Archivo:8.png]] | |
− | + | ||
− | + | ||
− | |||
− | + | Paso 3: Como se puede ver, el panel no tiene ninguna License Key asociada, para encontrar la clave de tu panel debemos entrar en gigas.com -> sección ayuda y soporte -> nos logamos -> en el menú derecho entra en Ver tickets -> clica sobre ver tickets resueltos -> en esta sección encontrarás un ticket que indica Tu licencia de Backup Avanzado, dentro de este ticket se encuentra un código alfanumérico que guardarás para aplicarlo sobre la sección del panel de backup avanzado License Information. | |
− | |||
− | + | [[Archivo:9.png]] | |
− | + | Paso 4: Pulsa sobre el botón Activate License, se abrirá un asistente que nos permitirá ingresar el campo Product Key, se introduce la licencia del ticket, y le damos en Activate License. Si todo ha ido bien, nos mostrará el mensaje de activación con éxito. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | [[Archivo:10.png]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Paso 5.- Al activarse la licencia, el estatus, pasará a encontrarse en modo Valido. | |
− | + | ||
− | + | ||
− | + | ||
− | |||
− | |||
− | |||
− | + | [[Archivo:11.png]] | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | ==Instalando el agente de backup== | |
− | + | Para poder realizar el backup de los cloud servers será necesario instalar en los mismos una pequeña aplicación que actuará de intermediario entre el servidor del que queramos hacer backup y la propia consola del backup avanzado. A continuación, describimos de una manera sencilla el método básico de instalación. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | |||
− | |||
− | |||
− | |||
− | + | ===Linux=== | |
+ | |||
+ | Añadir el repositorio de R1Soft a tu sistema, para ello tendrás que seleccionar el método en base a la distribución de Linux: | ||
+ | |||
+ | |||
+ | ====Distribuciones Debian/Ubuntu/Derivadas==== | ||
+ | |||
+ | Para distribuciones Debian/Ubuntu/Derivadas, se debe instalar el agente ejecutando: | ||
+ | |||
+ | |||
+ | {|class="wikitable col1left col2left left" style="width:600px" | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# echo deb http://repo.r1soft.com/apt stable main >> /etc/apt/sources.list | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# wget http://repo.r1soft.com/r1soft.asc | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# apt-key add r1soft.asc | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# apt-get update | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# apt-get install linux-headers-`uname -r` | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# apt-get install serverbackup-enterprise-agent | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | Para terminar con la instalación se debe agregar el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar). | ||
+ | |||
+ | {|class="wikitable col1left col2left left" style="width:600px" | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# cd /usr/sbin/r1soft/conf/server.allow/ | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# vi IP_Publica_Backup_Avanzado.key | ||
+ | |- | ||
+ | ||-----BEGIN PUBLIC KEY----- | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | |- | ||
+ | ||-----END PUBLIC KEY----- | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | |||
+ | |||
+ | ====Distribuciones CentOS/Fedora/Derivadas==== | ||
+ | |||
+ | Para distribuciones CentOS/Fedora/Derivadas, se debe agregar el agente al repositorio de la siguiente manera: | ||
+ | |||
+ | {|class="wikitable col1left col2left left" style="width:600px" | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# yum install kernel-devel kernel-headers | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# touch /etc/yum.repos.d/r1soft.repo | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# vi /etc/yum.repos.d/r1soft.repo | ||
+ | |- | ||
+ | ||[r1soft] | ||
+ | |- | ||
+ | ||name=R1Soft Repository Server | ||
+ | |- | ||
+ | ||baseurl=http://repo.r1soft.com/yum/stable/$basearch/ | ||
+ | |- | ||
+ | ||enabled=1 | ||
+ | |- | ||
+ | ||gpgcheck=0 | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | |||
+ | |||
+ | Y luego se instala el agente: | ||
+ | |||
+ | {|class="wikitable col1left col2left left" style="width:600px" | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# yum install serverbackup-enterprise-agent | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# /etc/init.d/cdp-agent stop | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | |||
+ | Para terminar con la instalación se debe agregar el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar). | ||
+ | |||
+ | {|class="wikitable col1left col2left left" style="width:600px" | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# cd /usr/sbin/r1soft/conf/server.allow/ | ||
+ | |- | ||
+ | ||[root@ServerPrueba ~]# vi IP_Publica_Backup_Avanzado.key | ||
+ | |- | ||
+ | ||-----BEGIN PUBLIC KEY----- | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX | ||
+ | |- | ||
+ | ||-----END PUBLIC KEY----- | ||
+ | |- | ||
+ | |} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ==== | + | ===Windows=== |
− | ( | + | |
+ | Cabe mencionar que, para las versiones de Windows, 2008, existe la posibilidad de ejecutar una auto-instalación a través de la consola web del backup avanzado, este método lo describiremos en la sección “Configurando la primera tarea de backup”: | ||
+ | |||
+ | Paso 1.- Descargar el paquete correspondiente a la arquitectura de sistema operativo que estemos usando: | ||
+ | |||
+ | Windows x32: http://repo.r1soft.com/trials/ServerBackup-Windows-Agent-x86.msi | ||
+ | Windows x64: http://repo.r1soft.com/trials/ServerBackup-Windows-Agent-x64.msi | ||
+ | |||
+ | |||
+ | Paso 2: Pulsa sobre el fichero descargado con botón derecho y le damos en Install, al terminar procedemos a reiniciar el servidor para terminar con la instalación. | ||
+ | |||
+ | Paso 3: Al ingresar al Windows Server ingresamos a la ruta C:\Program Files\Server Backup Agent\conf\server.allow, y creamos el archivo IP_Publica_Backup_Avanzado.key donde agregaremos el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar). | ||
+ | |||
+ | [[Archivo:a.png]] | ||
+ | |||
+ | ==Configurando la primera tarea de backup== | ||
+ | |||
+ | |||
+ | Paso 1: En el panel del Backup Avanzado, nos dirigimos a Setting y luego a Volumen, y procedemos a crear un nuevo Volumen, que será la ruta en donde se van a almacenar nuestros Backups, y le damos en Save. | ||
+ | |||
+ | [[Archivo:b.png]] | ||
+ | |||
+ | Paso 2: Vamos a crear la máquina virtual, para ellos nos vamos a dirigir a Protected Machines y le damos en New Machine. | ||
+ | |||
+ | [[Archivo:c.png]] | ||
+ | |||
+ | |||
+ | Parte 1: Vamos a agregar los datos de la máquina en donde hemos instalado el agente y crear la rutina de los Backup. | ||
+ | |||
+ | I. Details: Datos de la Máquina Virtual, un nombre a gusto del usuario, la IP Pública y/o privada de la máquina virtual (según sea el caso) y el Puerto (Se deja por defecto) | ||
+ | |||
+ | II. Backup Location: Se selecciona el Volumen creado en el Paso 1. | ||
+ | |||
+ | III. Backup Schedule: Programación de las tareas del backup. | ||
+ | |||
+ | [[Archivo:d.png]] | ||
+ | |||
+ | Parte 2: | ||
+ | |||
+ | I. Local Retention: puede determinar cuántos puntos de recuperación local se conservarán en la ruta del volumen ingresada en la sección Backup Location. | ||
+ | |||
+ | II. Compression: Se selecciona el tipo de compresión a utilizar. | ||
+ | |||
+ | III. Encryption: El cifrado le permite proteger de forma segura los datos a los que no desea que accedan otras personas. El cifrado AES-256 es utilizado para sus copias de seguridad. Para efectos de este manual, no se seleccionará esta opción. | ||
+ | |||
+ | IV. Agent Software: Si ya se ha instalado de forma manual el agente en los Sistemas Operativos, no se seleccionará esta opción. | ||
+ | |||
+ | [[Archivo:e.png]] | ||
+ | |||
+ | |||
+ | Paso 3: Por último, se configura el Disk Safe, para ellos nos dirigimos a la opción Setting y a Disk Safes y le damos en New Disk Safe. | ||
+ | |||
+ | |||
+ | [[Archivo:f.png]] | ||
+ | |||
+ | |||
+ | Para ello vamos a asignarle un nombre, seleccionar la máquina virtual en Protected Machine y elegir el Volumen creado. En la opción Devices podremos elegir la carpeta y/o carpetas a las que desearemos realizar el backup del servidor. | ||
+ | |||
− | + | [[Archivo:g.png]] | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | {{Soporte}} | ||
− | |||
− | [[Categoría: | + | [[Categoría:Copias_de_seguridad]] |
− | [[Categoría: | + | [[Categoría:Primeros_pasos]] |
− | [[Categoría: | + | [[Categoría:Panel_Control]] |
Revisión del 16:57 16 abr 2019
In the next guide we describe in an easy way the first steps to configure your advanced backup. It is mandatory that you have the credential data that we have sent you by e-mail, you will need them to manage the service.
If you don´t have this information you can contact the Support Team.
Contenido
First Steps: Control Panel
Remember that the servers must communicate with Advanced Backup through a VLAN, so, the servers and the Advanced backup must have a private IP.
For this we attach VLAN the guide:
Step 1: To access to the Advanced Backup control panel you need to login at Gigas control panel and after that you need to go from where you search for the advanced backup service).
Step 2: If you find the status of advanced backup off you need to turn it on and after that you need to left click on the name of the advanced backup.
Step 3: We proceed to configure the advanced backup, picking de datacenter and the VLAN for the internal comunicationes between the virtual servers, the IP rank and the password. After that we save.
Step 4: After the step 3 the server will restarts, it will appears with the new configuration like in the next picture. When you click on the name you need to assign the space for the advanced backup that it will use. (Remmeber that you can find the password of the interface at "Show")
Step 5: You assign the space at you desire and click on "Save", (Remmeber that this space its free by Gigas and shares the space with standard backup). Our Support and Sales team can bring to you all the information and solve your questions if you have anyone. After we select the space in GB format we click on "Save" again.
Paso 6: Al terminar de cargar, accedemos al Gestor para entrar al panel del backup avanzado. La dirección tendrá este formato: http://ip_proporcionado_mail:6443, nada más acceder debes loguearte con el usuario "admin" y la contraseña que colocaste al configurar el backup avanzado (Paso 3).
Si necesitas información adicional sobre la configuración de tu servicio de backup, podrás encontrar manuales completos en el siguiente enlace:
http://wiki.r1soft.com/display/ServerBackup/Documentation
Primeras configuraciones: Backup Avanzado
Paso 1: Al acceder al panel de control, aceptamos los términos y condiciones de la licencia.
Paso 2: Al acceder a la consola del Backup, nos dirigimos a la opción de License Information para activar la licencia del backup avanzado.
Paso 3: Como se puede ver, el panel no tiene ninguna License Key asociada, para encontrar la clave de tu panel debemos entrar en gigas.com -> sección ayuda y soporte -> nos logamos -> en el menú derecho entra en Ver tickets -> clica sobre ver tickets resueltos -> en esta sección encontrarás un ticket que indica Tu licencia de Backup Avanzado, dentro de este ticket se encuentra un código alfanumérico que guardarás para aplicarlo sobre la sección del panel de backup avanzado License Information.
Paso 4: Pulsa sobre el botón Activate License, se abrirá un asistente que nos permitirá ingresar el campo Product Key, se introduce la licencia del ticket, y le damos en Activate License. Si todo ha ido bien, nos mostrará el mensaje de activación con éxito.
Paso 5.- Al activarse la licencia, el estatus, pasará a encontrarse en modo Valido.
Instalando el agente de backup
Para poder realizar el backup de los cloud servers será necesario instalar en los mismos una pequeña aplicación que actuará de intermediario entre el servidor del que queramos hacer backup y la propia consola del backup avanzado. A continuación, describimos de una manera sencilla el método básico de instalación.
Linux
Añadir el repositorio de R1Soft a tu sistema, para ello tendrás que seleccionar el método en base a la distribución de Linux:
Distribuciones Debian/Ubuntu/Derivadas
Para distribuciones Debian/Ubuntu/Derivadas, se debe instalar el agente ejecutando:
[root@ServerPrueba ~]# echo deb http://repo.r1soft.com/apt stable main >> /etc/apt/sources.list |
[root@ServerPrueba ~]# wget http://repo.r1soft.com/r1soft.asc |
[root@ServerPrueba ~]# apt-key add r1soft.asc |
[root@ServerPrueba ~]# apt-get update |
[root@ServerPrueba ~]# apt-get install linux-headers-`uname -r` |
[root@ServerPrueba ~]# apt-get install serverbackup-enterprise-agent |
Para terminar con la instalación se debe agregar el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar).
[root@ServerPrueba ~]# cd /usr/sbin/r1soft/conf/server.allow/ |
[root@ServerPrueba ~]# vi IP_Publica_Backup_Avanzado.key |
-----BEGIN PUBLIC KEY-----
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
-----END PUBLIC KEY----- |
Distribuciones CentOS/Fedora/Derivadas
Para distribuciones CentOS/Fedora/Derivadas, se debe agregar el agente al repositorio de la siguiente manera:
[root@ServerPrueba ~]# yum install kernel-devel kernel-headers |
[root@ServerPrueba ~]# touch /etc/yum.repos.d/r1soft.repo |
[root@ServerPrueba ~]# vi /etc/yum.repos.d/r1soft.repo |
[r1soft] |
name=R1Soft Repository Server |
baseurl=http://repo.r1soft.com/yum/stable/$basearch/ |
enabled=1 |
gpgcheck=0 |
Y luego se instala el agente:
[root@ServerPrueba ~]# yum install serverbackup-enterprise-agent |
[root@ServerPrueba ~]# /etc/init.d/cdp-agent stop |
Para terminar con la instalación se debe agregar el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar).
[root@ServerPrueba ~]# cd /usr/sbin/r1soft/conf/server.allow/ |
[root@ServerPrueba ~]# vi IP_Publica_Backup_Avanzado.key |
-----BEGIN PUBLIC KEY-----
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
-----END PUBLIC KEY----- |
Windows
Cabe mencionar que, para las versiones de Windows, 2008, existe la posibilidad de ejecutar una auto-instalación a través de la consola web del backup avanzado, este método lo describiremos en la sección “Configurando la primera tarea de backup”:
Paso 1.- Descargar el paquete correspondiente a la arquitectura de sistema operativo que estemos usando:
Windows x32: http://repo.r1soft.com/trials/ServerBackup-Windows-Agent-x86.msi Windows x64: http://repo.r1soft.com/trials/ServerBackup-Windows-Agent-x64.msi
Paso 2: Pulsa sobre el fichero descargado con botón derecho y le damos en Install, al terminar procedemos a reiniciar el servidor para terminar con la instalación.
Paso 3: Al ingresar al Windows Server ingresamos a la ruta C:\Program Files\Server Backup Agent\conf\server.allow, y creamos el archivo IP_Publica_Backup_Avanzado.key donde agregaremos el Public Key (Para conseguir la clave pública debes ir al Panel de control del backup y en el menú de la izquierda pulsar sobre “Advanced Options”, nada más acceder verás un cuadro de texto cuyo nombre es “Public Key” esto es lo que debes copiar).
Configurando la primera tarea de backup
Paso 1: En el panel del Backup Avanzado, nos dirigimos a Setting y luego a Volumen, y procedemos a crear un nuevo Volumen, que será la ruta en donde se van a almacenar nuestros Backups, y le damos en Save.
Paso 2: Vamos a crear la máquina virtual, para ellos nos vamos a dirigir a Protected Machines y le damos en New Machine.
Parte 1: Vamos a agregar los datos de la máquina en donde hemos instalado el agente y crear la rutina de los Backup.
I. Details: Datos de la Máquina Virtual, un nombre a gusto del usuario, la IP Pública y/o privada de la máquina virtual (según sea el caso) y el Puerto (Se deja por defecto)
II. Backup Location: Se selecciona el Volumen creado en el Paso 1.
III. Backup Schedule: Programación de las tareas del backup.
Parte 2:
I. Local Retention: puede determinar cuántos puntos de recuperación local se conservarán en la ruta del volumen ingresada en la sección Backup Location.
II. Compression: Se selecciona el tipo de compresión a utilizar.
III. Encryption: El cifrado le permite proteger de forma segura los datos a los que no desea que accedan otras personas. El cifrado AES-256 es utilizado para sus copias de seguridad. Para efectos de este manual, no se seleccionará esta opción.
IV. Agent Software: Si ya se ha instalado de forma manual el agente en los Sistemas Operativos, no se seleccionará esta opción.
Paso 3: Por último, se configura el Disk Safe, para ellos nos dirigimos a la opción Setting y a Disk Safes y le damos en New Disk Safe.
Para ello vamos a asignarle un nombre, seleccionar la máquina virtual en Protected Machine y elegir el Volumen creado. En la opción Devices podremos elegir la carpeta y/o carpetas a las que desearemos realizar el backup del servidor.